Men's Wedding Bands

Featured Men's Wedding Bands

The 12 men's wedding bands in this collection span plain Tanner construction and designed gold wedding bands.

The Tanner family (plain gold wedding bands, 5 widths): Tanner 2mm, Tanner 4mm, Tanner 6mm. Comfort fit interior, low dome exterior. Available in 14K or 18K gold (yellow, white, or rose) or platinum.

Designed men's wedding bands:

— Flynn (knife edge profile — tapered top meeting at a center ridge)
— Jamie (gold dome wedding band with substantial profile)
— Adam (Greek key pattern — classical decorative motif)
— Townes (hammered finish — textured surface catching light differently)
— Percy (domed top with step edge detail)
— Kennedy (flat top with step edge — modern geometric)
— Milo (brushed finish dome — matte satin texture)

Why Choose a Precious Metal Wedding Band

Precious metal wedding bands (gold and platinum) differ from alternative metal wedding rings in significant ways. For couples weighing the decision, these are the practical differences.

Resizing: Gold and platinum wedding bands can be resized in the future as fingers change size (gradual changes from aging, weight, or other factors). Alternative metal wedding rings cannot be resized — sizing is permanent at the time of crafting.

Service and repair: Gold and platinum can be refinished if surface marks accumulate over years of wear, can be repaired if damaged, can have surface texture restored, and can be serviced indefinitely. Alternative metal wedding rings cannot be repaired or refinished — damaged rings require full replacement.

Engraving: Both categories accept engraving, but gold and platinum can also be re-engraved or have engraving deepened over time. Alternative metal engraving is permanent at the time of application.

Symbolic and traditional weight: Precious metals carry traditional wedding ring symbolism — gold and platinum have been wedding band metals for centuries. Alternative metals are newer to the wedding ring category (largely emerging in the 1990s and 2000s).

Price: Precious metal wedding bands cost significantly more than alternative metal rings. Gold men's bands range $1,000-$2,800; platinum adds another $400-$800. Alternative metal rings range $125-$360.

Long-term value: Gold and platinum have intrinsic metal value that doesn't depreciate. Alternative metal wedding rings depreciate to roughly zero resale value almost immediately.

For couples wanting a wedding ring that's serviceable for life, carries traditional symbolic weight, and represents a long-term investment in metal value — precious metal is the choice. For couples prioritizing maximum daily wear durability at low cost — alternative metals.

Tanner Family: Plain Gold Comfort Fit Wedding Bands

The Tanner family is our core men's wedding band collection — plain gold comfort fit wedding bands in five widths from 2mm to 10mm. Same design language across all five widths.

Every Tanner uses comfort fit interior (rounded inside surface — smooth against the finger during daily wear) and low dome exterior (softly rounded top surface that catches light without being highly reflective). The five widths scale the same design across different proportions.

2mm Tanner: Refined thin band. Works for men with smaller hands or those wanting a less prominent wedding band.

4mm Tanner: Standard wedding band width across most hand sizes. Most chosen for refined men's wedding bands.

6mm Tanner: Substantial daily wedding band width. Reads clearly masculine without being statement scale. Most chosen for men's wedding bands across hand sizes.

8mm Tanner: Traditional men's wedding band width. Bold daily presence. Most chosen by men wanting clearly substantial wedding band scale.

10mm Tanner: Statement width. Maximum metal presence on the hand. Chosen by men whose wedding band is the primary jewelry piece they wear.

The Tanner family is available in 14K or 18K gold (yellow, white, or rose) or platinum. The same design language is consistent across karat levels and metal colors — the choice of metal affects color and weight, not the design.

Designed Men's Wedding Bands — Profile, Pattern, Texture

The designed men's wedding bands in this collection bring shape, pattern, or surface texture variation beyond plain Tanner construction.

Profile variations:

— Knife edge (Flynn): Tapered top surface meeting at a center ridge. The two angled surfaces catch light differently, producing a distinctive geometric profile.

— Dome (Jamie, Percy, Milo): Rounded top surface. Jamie carries substantial dome; Percy combines dome with step edge detail; Milo combines dome with brushed finish.

— Flat with step edge (Kennedy): Flat top surface with stepped edge detail. Reads modern and geometric.

Pattern variations:

— Greek key (Adam): The Greek key (or meander) pattern is a classical decorative motif from ancient Greek architecture — geometric continuous lines forming a repeating pattern. The Adam carries this pattern across the band's exterior surface.

Surface texture variations:

— Hammered (Townes): Textured surface created by hammering the metal during crafting. Each hammered facet catches light differently. Reads handcrafted and substantial.

— Brushed (Milo): Fine linear texture across the surface, producing a soft satin appearance rather than bright shine. Reads modern and restrained.

The choice between profile, pattern, and texture variations is personal. Each treatment carries different visual character — knife edge reads geometric, dome reads classic, Greek key reads classical, hammered reads handcrafted, brushed reads modern.

Width Selection for Men's Wedding Bands

Width is the most consequential visible choice in a men's wedding band. The right width depends on hand proportion, daily wear preference, and design preference.

For most men's wedding bands across hand sizes, 6mm or 8mm is the practical range. 6mm reads substantial without being statement scale. 8mm reads traditionally masculine — the standard "men's wedding band" width. The choice between 6mm and 8mm depends on whether the wearer wants the band to be present-but-quiet (6mm) or more visually substantial (8mm).

For men with smaller hands, 4mm or 5mm reads proportionate without overwhelming the finger. The Tanner 4mm and designed bands at 4mm width work well at this scale.

For men with larger hands or those wanting statement scale, 10mm is the maximum standard width. The Tanner 10mm and some designed bands at 10mm produce dominant visual presence.

For couples coordinating bands, width choice typically differs between partners — each partner chooses the width that matches their hand and preference, often within the same design family (different Tanner widths, for example). We discuss width during the order conversation; for couples within travel distance of Dayton, in-person sizing at the studio gives the most accurate sense of how different widths read on the actual hand.

Customization — Karat, Color, Engraving

Men's wedding bands in this collection are made-to-order with customization at multiple levels.

Karat choice: 14K gold (58.3% pure gold, balanced durability and color richness — the most chosen karat for wedding bands), 18K gold (75% pure gold, richer color, slightly softer alloy), or platinum (most durable, hypoallergenic, holds color permanently). The karat choice affects durability, color richness, and price.

Color choice: Yellow gold (warm traditional color), white gold (cool white tone, may need periodic rhodium replating every 2-3 years), or rose gold (warm pink-toned alloy). Platinum is naturally cool white and holds its color permanently.

Width selection: For Tanner, five widths from 2mm to 10mm. For designed bands, widths typically range 4mm to 8mm with some designs available in 6mm or 8mm only.

Engraving: Interior engraving is included at no additional charge. Standard engraving accommodates 30-50 characters depending on band width and font. Typical engraving is the wedding date, initials, a short phrase, or coordinates. Exterior engraving (decorative scrollwork or monograms) is available for additional cost depending on complexity.

Custom designs: For men wanting wedding bands outside this collection — different widths, profiles, surface treatments, or patterns — Lisa designs custom men's wedding bands during a private design appointment. Custom designs are crafted in 3-4 weeks after approval.

Care and Lifetime Service for Precious Metal Wedding Bands

Gold and platinum men's wedding bands are designed for lifetime daily wear. With reasonable care, they hold up to decades of use while retaining their visual character.

Daily care: Remove the band before heavy manual work, gym workouts with weights, gardening, contact sports, and activities involving harsh chemicals or solvents. Clean weekly with warm soapy water and a soft cloth — gold and platinum don't require special cleaners. Annual professional cleaning maintains brightness; this service is free for any ring we've crafted.

Surface maintenance: Polished gold and platinum bands develop minor surface scratches over years of wear that can be polished off during professional service. Hammered, brushed, or patterned surfaces are designed to hide minor marking — the texture itself produces visual interest that masks individual scratches.

White gold maintenance: White gold men's wedding bands typically require rhodium replating every 2-3 years to maintain the bright white finish. Some wearers prefer letting the rhodium wear naturally, revealing the warmer underlying white gold color over time. Both approaches are valid; we discuss preference during the order conversation.

Lifetime service: Gold and platinum men's wedding bands can be resized, refinished, repaired, and serviced indefinitely. We maintain records of every ring we craft to support service over time. Resizing typically takes 1-2 weeks; refinishing or surface restoration takes 1 week. All service work is handled through our New York workshop.