The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring on model | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring on model | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
The Kingsley Marquise Diamond Engagement Ring | Lisa Robin
Gender Neutral Engagement Rings and Wedding Bands

The Kingsley 1 Carat Marquise Diamond Engagement Ring

Get ready to wonder at the perfectly balanced beauty of our Kingsley engagement ring—this unforgettable design shows off the elegant and elongated shape of a high quality 1 carat marquise-cut...
$ 4,295.00 $ 2,995.00 Save $ 1,300.00
/
Color
Shape

The Kingsley positions a marquise diamond off-center, cantilevered above the pavé band rather than centered on it. The diamond floats toward one side, its full elongated length reading uninterrupted across the finger, while a hidden halo of small accent diamonds set beneath the center catches light from the side and reflects it upward into the marquise. This version comes complete in 14k white gold with a one-carat lab-created marquise center.

Metal 14k White Gold
Center Diamond 1 carat lab-created marquise, VS1, F
Style Off-center marquise diamond engagement ring
Setting Six rounded prongs with hidden halo
Band 1.85mm
Setting Height Medium
Band Profile Diamond pavé
Crafting Time Approximately 3-4 weeks

The Kingsley is $2,995, complete with its 1 carat lab-created marquise center in 14k white gold.

What makes this setting stand out visually?

The marquise center is set off-center and cantilevered — it floats toward one side above the pavé band rather than sitting squarely in the middle, so its full one-carat length reads uninterrupted across the finger. Beneath it, a hidden halo of small accent diamonds catches light from the side, and the 1.85mm pavé band carries brilliance along the shank. The asymmetry is what sets it apart from a conventional centered marquise.

How will this ring pair with a wedding band?

Because the marquise sits cantilevered above the band rather than low against it, a straight wedding band can sit close along the pavé shank. The off-center float leaves room beside the center, so a plain or pavé band lines up cleanly without crowding the marquise. If you'd prefer a contoured band shaped to the setting, we can plan that together during your design appointment.

What should I consider when choosing this style?

This Kingsley comes complete with a 1 carat marquise lab grown diamond, VS1 clarity and F color, so the center is already set rather than selected. The marquise is an elongated, pointed shape — consider whether you prefer that dramatic line over a rounder cut, knowing its points are framed and protected by the setting. The off-center, modern silhouette suits you if you want something less traditional than a centered solitaire.

Our guided approach to customizing each ring with intention and clarity.

Every Lisa Robin ring is made to order, which means your design can be thoughtfully refined—even when ordering online. Whether you’re adjusting a detail or evolving the design, we guide you through each decision to ensure the final piece feels cohesive and entirely yours.

Design refinements can be explored after your initial order, with any pricing adjustments clearly outlined and approved before crafting begins.

Refinement options include:

  • Adjusting the width or taper of the band (shank)
  • Modifying or adding side diamonds for additional detail or presence
  • Changing the prong style (claw, round, double prong, etc.)
  • Adjusting the number of prongs for both aesthetic and structure
  • Refining the basket design for a different profile or overall look
  • Selecting your preferred metal type and color
  • Adapting the design to better coordinate with a wedding ring
Made to order Ships Aug 01 to Aug 08
Shipping costs calculated at checkout

THE KINGSLEY

The Kingsley sets a 1 carat marquise-cut lab grown diamond off-center above a pavé band, so its full elongated length reads uninterrupted across your finger. A hidden halo beneath the center reflects light up into the diamond, while the off-center placement gives this complete 14k white gold ring its quietly modern, asymmetric line.

The Kingsley 1 Carat Marquise Diamond Engagement Ring
The Kingsley 1 Carat Marquise Diamond Engagement Ring

Design Process

The Lisa Robin Design Experience

A thoughtful process designed to bring clarity and confidence to the creation of your ring.

Online Ordering

Order your engagement ring through a clearly guided online experience, supported by in-depth educational resources throughout the website. If you’d like to personalize the setting, simply place your order—we’ll follow up to refine the details and align everything with your preferences.

Private Design Appointments

For a more collaborative experience, work with us one-on-one, either in person or virtually. We’ll guide you through each decision in real time, shaping your engagement ring with clarity and intention.

This ring is offered complete. The center is already selected and included in the price, so there's nothing further for you to source or choose.

Where the center is a one-of-a-kind gemstone, we'll send you an image of the actual gemstone before it's set — so you see the exact piece going into your ring rather than a representative photograph.

Before your ring is hand-crafted, you’ll review detailed renderings created using your diamond’s dimensions. Multiple views allow proportions and design details to be carefully reviewed, and you’ll approve the design before crafting begins. If a wedding ring is selected on the same order, renderings will also show the rings individually and together so you can see how they pair.

Once your design is approved, your ring is hand-crafted specifically for you and typically completed in about three weeks.

What our customers say

I loved working with Lisa Robin! It was so easy to create exactly what I wanted. With some minor changes to Lisa's gorgeous styles, I had the perfect wedding ring to coordinate with my Lisa Robin Engagement Ring. Can’t wait to add another ring to my stack.

Abby and Zane
Blountville, Tennessee

Our experience with Lisa Robin was delightful. We found our Lisa Robin engagement ring Instagram and then picked out and bought our wedding rings online. Every question we had was answered quickly. Lisa made us feel special and guided us in the right direction. When we got our rings, they were just what we wanted, expressing our style and love perfectly. We are so happy with how everything turned out.

Mary Katherine and Adam
Columbus, Ohio

Complete the style

For a balanced wedding set, pair the Kingsley with a wedding ring chosen to complement its profile.

The Ellen Diamond Wedding Ring - Lisa Robin#color_10k-yellow-gold
The Ellen Pavé Diamond Wedding Ring

Gender Neutral Engagement Rings and Wedding Bands — Frequently Asked Questions

Gender neutral rings are designed without the visual markers that traditionally distinguish 'men's' from 'women's' rings — meaning they don't lean toward extremely substantial widths (traditional masculine), extremely refined narrow widths (traditional feminine), heavy surface texture, floral motifs, or other visual elements that carry strong gender associations. Instead, gender neutral designs use middle-range widths (typically 3-5mm), balanced proportions, clean construction, restrained diamond placement, and design vocabulary that reads appropriately on any hand. Many rings designed without specific gender intent end up working as gender neutral by default; this collection curates those designs into a single browsable group.
Yes — this is one of the primary use cases for the gender neutral collection. Both partners can choose rings from the same design family with width or material variations adapting each ring to the wearer's hand. Common approaches: same design at different widths (4mm and 6mm Tanner, for example), same width in different metals (yellow gold and white gold), same design at identical specifications (when hand sizes are similar), or coordinated-but-distinct designs (each partner chooses a different ring that shares aesthetic vocabulary). The Tanner family is particularly suited for matched couples' bands because it offers five widths in the same design language.
No. Engagement rings and wedding bands are personal choices — some couples choose both, some choose only wedding bands, some choose only engagement rings, and configurations vary. There's no universal expectation that any particular configuration is correct. For same-gender couples or any couple preferring a streamlined approach, both partners wearing wedding bands only (without engagement rings) is a valid choice. For couples wanting more ring presence, both partners can wear engagement ring + wedding band. The configuration choice should serve the couple's preferences, not external expectations.
Yes — the design vocabulary in this collection is a starting point, not a constraint. Adjustments toward more traditionally masculine (wider band, more substantial profile, surface texture) or more traditionally feminine (narrower band, more refined proportions, more prominent diamond detail) can be made during custom design. Some couples want their rings to land at the gender neutral midpoint; others want their rings to lean slightly in one direction while remaining outside the traditional 'his and hers' binary. We discuss preferences during the design conversation. The flexibility is the point: the rings should reflect each wearer's individual identity rather than fitting predefined categories.
That's a valid choice. Couples don't need to wear matching or even coordinated rings — many couples choose rings that reflect each partner's individual style preferences. One partner might want a substantial textured wedding band while the other prefers a refined diamond eternity ring. The relationship doesn't require visual symmetry between the rings. For couples wanting some visual connection between distinctly different rings, options include shared metal (both rings in yellow gold, for example), shared engraving (matching dates or phrases inside both rings), or shared diamond origin (both rings using lab grown diamonds). We discuss approaches during the design conversation.
Yes. A gender neutral wedding band can be paired with any engagement ring, including engagement rings that lean more traditionally feminine or masculine. The pairing decisions involve standard considerations: matching diamond cut vocabulary, metal coordination, width proportion, and design language coherence. A gender neutral wedding band paired with a more characterful engagement ring creates a deliberate vocabulary mix — the engagement ring brings the design statement, the wedding band brings refined support. Many couples find this approach works well because the engagement ring carries the visual focal weight and the wedding band supports without competing.
Rings in this collection are made-to-order in approximately 2-4 weeks from when your order is placed. Wedding bands typically finish in 2-3 weeks. Engagement rings with center stones and substantial design typically take 3-4 weeks. Custom designs (where Lisa designs something specific to your vision) take 3-4 weeks from design approval. Interior engraving adds approximately 1 week to any timeline. For wedding date deadlines, confirm timeline during the order conversation.
Yes. All diamonds in this collection can be specified as lab grown or natural. Lab grown diamonds are physically and optically identical to natural diamonds — same hardness, same brilliance, same chemical and crystal structure — but cost approximately 40-60% less for the same carat weight, color, and clarity. Most accent diamonds in wedding bands today are lab grown; the visual difference is undetectable. Lab grown diamonds are particularly aligned with values around responsible sourcing for couples who prioritize that consideration. We discuss diamond origin during the design conversation.
Pricing depends on the specific design, metal choice, diamond specifications, and any customization. Plain Tanner gold wedding bands start around $700-$2,400 depending on width and karat. Diamond wedding bands range $1,200-$8,000+ depending on diamond count, carat weight, and design complexity. Engagement rings in this collection start around $2,500-$3,500 for solitaire designs and range to $15,000+ for more substantial designs with larger center stones. Custom designs vary based on specifications. Lab grown diamonds reduce cost approximately 40-60% compared to natural. Specific pricing is confirmed during the design conversation.
Yes. Design appointments are open to anyone planning engagement rings, wedding bands, or other significant jewelry. The appointment is a conversation about your relationship, your aesthetic preferences, your timeline, and your budget. Whether you're a same-gender couple choosing matched wedding bands, a nonbinary individual designing a single ring for yourself, an engaged couple of any configuration, or anyone wanting to discuss ring design — the appointment serves your specific situation rather than fitting you into predetermined categories. Appointments are available via Zoom, phone, or in person at the Dayton studio. The first appointment is complimentary.
Back to Gender Neutral Engagement Rings and Wedding Bands